Technical Content

For long in seismic imaging, velocity model building and depth migration/inversion have produced information on the subsurface velocity model with no overlap in terms of resolved vertical wavelengths. The not covered wavelengths, among which the famous mid frequency gap, had then to be recovered ...

Assessing the uncertainty on the structural information contained in seismic images is critical for risk analysis in reservoir delineation, reserve estimation, and well planning. We propose here an original approach aiming at assessing structural uncertainties associated to ray based tomography. While it has similarities ...

3500 km2 of marine data from West of Shetlands have been reprocessed using latest processing technologies available (including deghosting). This case study demonstrates the benefit to re-process conventionnal data (acquired in the 90's) to get a broadband result (better definition, larger spectrum).

We propose a laterally constrained surface wave inversion to obtain a reliable near-surface shear-wave velocity field from Rayleigh wave measurements. This workflow is targeted at dense 3D broadband Wide-Azimuth land surveys, aiming to obtain reliable and realistic lateral shear-wave velocity variations pertinent with regard ...

A broadband Wide-Azimuth Towed-Streamer (WATS) survey was acquired in a shallow water region of offshore China for the purpose of resolving strike direction narrow-azimuth acquisition shortcomings. However, the current WATS acquisition is much sparser than WATS surveys in deep water environments. The challenges of ...

2D deconvolution is an attractive approach for short period multiple prediction as it does not require direct recording of the multiple generator and can model multiples relating to more than one multiple generator at a time. One drawback, however, relates to an inherent over ...

Make a technical workflow including rockphysics, post-stack gestatistical inversion, seismic forward research and coal constrained pre-stack geostatistical inversion for the fine reservoir predictiong under coal interbedded. This work flow achieved huge success in the new development wells drilling.

A subsurface volume that can be reliably interpreted in terms of geologically-relevant attributes is a reasonable objective for products from depth inversion workflows. Commonly the field geophysics data available are inherently non-unique and deficient (noise, aliasing, etc.), so an implementation of some type of ...

Standard reflection-based model building for land applications is challenging due to reduced data quality, near-surface heterogeneities, and the low-fold of reflection data at shallow depths. Broadband and large offset data acquisitions have been developed with the aim of investigating full waveform inversion (FWI) as ...